Basic Micro: Home Specials http://www.basicmicro.com Fri, 17 May 2013 00:00:00 EST List of Home Featured Items at Basic Micro en-us <![CDATA[Nano USB2Serial Adapter]]> http://www.basicmicro.com/Nano-USB2Serial-Adapter_p_35.html Fri, 17 May 2013 00:00:00 EST The Nano USB2Serial adapter is an standard USB to serial adapter. It is an easy to use programming interface for the Nano line of micros. With its simple 1 wire interface and bus power the USB2Serial adapter is very easy to use and setup. Each adapte...[Read More]
Our Price: $14.95 [Add to Cart]


]]> http://www.basicmicro.com/Nano-USB2Serial-Adapter_p_35.html The Nano USB2Serial adapter is an standard USB to serial adapter. It is an easy to use programming interface for the Nano line of micros. With its simple 1 wire interface and bus power the USB2Serial adapter is very easy to use and setup. Each adapte...[Read More]
Our Price: $14.95 [Add to Cart]


]]>
The USB2Serial adapter is NOT required to program or use the Nano micros. Any standard RS232 or USB to serial adapter can be used.

]]> <![CDATA[Nano 40]]> http://www.basicmicro.com/Nano-40_p_36.html Fri, 17 May 2013 00:00:00 EST The Nano is an easy to use microcontroller based on a powerful BASIC programming language. The programming language is free for download. It includes several sample programs and a free manual.The Nano runs up to 2x faster on average than competing pr...[Read More]
Our Price: $10.95 [Add to Cart]


]]> http://www.basicmicro.com/Nano-40_p_36.html The Nano is an easy to use microcontroller based on a powerful BASIC programming language. The programming language is free for download. It includes several sample programs and a free manual.The Nano runs up to 2x faster on average than competing pr...[Read More]
Our Price: $10.95 [Add to Cart]


]]>
The Nano runs up to 2x faster on average than competing products! No resonator for reduced part count.

The Nano commands are NOT tied to specific pins. Downloading your program to the Nano is done using a simple serial or USB connection from your PC.

]]> <![CDATA[Nano 28]]> http://www.basicmicro.com/Nano-28_p_37.html Fri, 17 May 2013 00:00:00 EST The Nano is an easy to use microcontroller based on a powerful BASIC programming language. The programming language is free for download. It includes several sample programs and a free manual.The Nano runs up to 2x faster on average than competing pr...[Read More]
Our Price: $8.95 [Add to Cart]


]]> http://www.basicmicro.com/Nano-28_p_37.html The Nano is an easy to use microcontroller based on a powerful BASIC programming language. The programming language is free for download. It includes several sample programs and a free manual.The Nano runs up to 2x faster on average than competing pr...[Read More]
Our Price: $8.95 [Add to Cart]


]]>
The Nano runs up to 2x faster on average than competing products! No resonator for reduced part count.

The Nano commands are NOT tied to specific pins. Downloading your program to the Nano is done using a simple serial or USB connection from your PC.

]]> <![CDATA[Nano 18]]> http://www.basicmicro.com/Nano-18_p_38.html Fri, 17 May 2013 00:00:00 EST The Nano is an easy to use microcontroller based on a powerful BASIC programming language. The programming language is free for download. It includes several sample programs and a free manual.The Nano runs up to 2x faster on average than competing pr...[Read More]
Our Price: $7.95 [Add to Cart]


]]> http://www.basicmicro.com/Nano-18_p_38.html The Nano is an easy to use microcontroller based on a powerful BASIC programming language. The programming language is free for download. It includes several sample programs and a free manual.The Nano runs up to 2x faster on average than competing pr...[Read More]
Our Price: $7.95 [Add to Cart]


]]>
The Nano runs up to 2x faster on average than competing products! No resonator for reduced part count.

The Nano commands are NOT tied to specific pins. Downloading your program to the Nano is done using a simple serial or USB connection from your PC.

]]> <![CDATA[Power Switch Radio Controlled 10A Relay]]> http://www.basicmicro.com/Power-Switch-Radio-Controlled-10A-Relay_p_44.html Fri, 17 May 2013 00:00:00 EST The Power Switch is a Relay based switch. Control loads up to 125VDC at 10Amp. 3 Modes of control, hobby radio receiver, TTL or serial. The Power Switch can be bussed for controlling several switches with 1 I/O. Great for controlling high current ind...[Read More]
Our Price: $16.95 [Add to Cart]


]]> http://www.basicmicro.com/Power-Switch-Radio-Controlled-10A-Relay_p_44.html The Power Switch is a Relay based switch. Control loads up to 125VDC at 10Amp. 3 Modes of control, hobby radio receiver, TTL or serial. The Power Switch can be bussed for controlling several switches with 1 I/O. Great for controlling high current ind...[Read More]
Our Price: $16.95 [Add to Cart]


]]>
]]> <![CDATA[RoboClaw 2x15A]]> http://www.basicmicro.com/RoboClaw-2x15A_p_45.html Fri, 17 May 2013 00:00:00 EST New V3 upgraded features! Now 15Amp per channel, 30Amp peak, 3Amp switching mode BEC and now up to 8,000,000 pulse per second encoder support. Compatible with Arduino.The RoboClaw 2x15 Amp is an extremely efficient, versatile, dual channel synchronou...[Read More]
Our Price: $89.95 [Add to Cart]


]]> http://www.basicmicro.com/RoboClaw-2x15A_p_45.html New V3 upgraded features! Now 15Amp per channel, 30Amp peak, 3Amp switching mode BEC and now up to 8,000,000 pulse per second encoder support. Compatible with Arduino.The RoboClaw 2x15 Amp is an extremely efficient, versatile, dual channel synchronou...[Read More]
Our Price: $89.95 [Add to Cart]


]]>
The RoboClaw 2x15 Amp is an extremely efficient, versatile, dual channel synchronous regenerative motor controller. It supports dual quadrature encoders and can supply two brushed DC motors with 15 Amps continuous and 30 Amp peak.

With dual quadrature decoding you get greater control over speed and velocity. Automatically maintain a speed even if the load increases. RoboClaw also has a built in PID routine for use with an external control system.

RoboClaw is easy to control with several built in modes. It can be controlled from a standard RC receiver/transmitter, serial device, microcontroller or an analog source, such as a potentiometer based joystick. RoboClaw is equipped with screw terminal for fast connect and disconnect. All modes are set by the onboard dip switches making setup a snap!

Being a synchronous regenerative motor controller means when ever RoboClaw is slowing down or breaking the batteries are being charged. With the advance circuitry it can also change direction during full throttle without damage!

RoboClaw also includes a jumper selectable 5V 3A BEC and lithium cutoff mode which protects your batteries from damage. Get the power to win your next robotics competition!

]]> <![CDATA[RoboClaw 2x30A]]> http://www.basicmicro.com/RoboClaw-2x30A_p_46.html Fri, 17 May 2013 00:00:00 EST New V3 upgraded features! Now 30Amp per channel, 60Amp peak, 3Amp switching mode BEC and now up to 8,000,000 pulse per second encoder support. Compatible with Arduino.The RoboClaw 2x30 Amp is an extremely efficient, versatile, dual channel synchronou...[Read More]
Our Price: $124.95 [Add to Cart]


]]> http://www.basicmicro.com/RoboClaw-2x30A_p_46.html New V3 upgraded features! Now 30Amp per channel, 60Amp peak, 3Amp switching mode BEC and now up to 8,000,000 pulse per second encoder support. Compatible with Arduino.The RoboClaw 2x30 Amp is an extremely efficient, versatile, dual channel synchronou...[Read More]
Our Price: $124.95 [Add to Cart]


]]>
The RoboClaw 2x30 Amp is an extremely efficient, versatile, dual channel synchronous regenerative motor controller. It supports dual quadrature encoders and can supply two brushed DC motors with 30 Amps continuous and 60 Amp peak.

With dual quadrature decoding you get greater control over speed and velocity. Automatically maintain a speed even if the load increases. RoboClaw also has a built in PID routine for use with an external control system.

RoboClaw is easy to control with several built in modes. It can be controlled from a standard RC receiver/transmitter, serial device, microcontroller or an analog source, such as a potentiometer based joystick. RoboClaw is equipped with screw terminal for fast connect and disconnect. All modes are set by the onboard dip switches making setup a snap!

Being a synchronous regenerative motor controller means when ever RoboClaw is slowing down or breaking the batteries are being charged. With the advance circuitry it can also change direction during full throttle without damage!

RoboClaw also includes a jumper selectable 5V 3A BEC and lithium cutoff mode which protects your batteries from damage. Get the power to win your next robotics competition!

]]> <![CDATA[RoboClaw 2x5A]]> http://www.basicmicro.com/RoboClaw-2x5A_p_47.html Fri, 17 May 2013 00:00:00 EST New V2 upgraded features! Now 10Amp peak and up to 8,000,000 pulse per second encoder support. Compatible with Arduino.The RoboClaw 2x5 Amp is an extremely efficient, versatile, dual channel synchronous regenerative motor controller. It supports dual...[Read More]
Our Price: $69.95 [Add to Cart]


]]> http://www.basicmicro.com/RoboClaw-2x5A_p_47.html New V2 upgraded features! Now 10Amp peak and up to 8,000,000 pulse per second encoder support. Compatible with Arduino.The RoboClaw 2x5 Amp is an extremely efficient, versatile, dual channel synchronous regenerative motor controller. It supports dual...[Read More]
Our Price: $69.95 [Add to Cart]


]]>
The RoboClaw 2x5 Amp is an extremely efficient, versatile, dual channel synchronous regenerative motor controller. It supports dual quadrature encoders and can supply two brushed DC motors with 5 Amps continuous and 10 Amp peak.

With dual quadrature decoding you get greater control over speed and velocity. Automatically maintain a speed even if the load increases. RoboClaw also has a built in PID routine for use with an external control system.

RoboClaw is easy to control with several built in modes. It can be controlled from a standard RC receiver/transmitter, serial device, microcontroller or an analog source, such as a potentiometer based joystick. RoboClaw is equipped with screw terminal for fast connect and disconnect. All modes are set by the onboard dip switches making setup a snap!

Being a synchronous regenerative motor controller means when ever RoboClaw is slowing down or breaking the batteries are being charged. With the advance circuitry it can also change direction during full throttle without damage!

RoboClaw also includes a jumper selectable 5V BEC and lithium cutoff mode which protects your batteries from damage. Get the power to win your next robotics competition!

]]> <![CDATA[BasicATOM Pro 28 Module]]> http://www.basicmicro.com/BasicATOM-Pro-28-Module_p_60.html Fri, 17 May 2013 00:00:00 EST The BasicATOM Pro 28 has 4 additional I/O and 4KBytes of EEPROM. It is based on the same powerful 32 bit processor as the Basic ATOM Pro 24-M. The BasicATOM Pro 28 includes 32K of Flash memory for your programs and 2K of ram which is enough space for...[Read More]
Our Price: $59.95 [Add to Cart]


]]> http://www.basicmicro.com/BasicATOM-Pro-28-Module_p_60.html The BasicATOM Pro 28 has 4 additional I/O and 4KBytes of EEPROM. It is based on the same powerful 32 bit processor as the Basic ATOM Pro 24-M. The BasicATOM Pro 28 includes 32K of Flash memory for your programs and 2K of ram which is enough space for...[Read More]
Our Price: $59.95 [Add to Cart]


]]>
The BasicATOM Pro's 32 bit core, running an average of 100,000 BASIC instructions per second leaves just about everything else in the dust!

]]> <![CDATA[BasicATOM Pro 40 Module]]> http://www.basicmicro.com/BasicATOM-Pro-40-Module_p_63.html Fri, 17 May 2013 00:00:00 EST The BasicATOM Pro 40 is based on a powerful 32 bit processor with more hardware and a 20% speed increased compared to the Basic ATOM Pro 24 or 28 pin modules. The BasicATOM Pro 40 includes 56K of Flash, 4K of RAM, 4Kbytes EEPROM and 2 Hardware UARTs....[Read More]
Our Price: $69.95 [Add to Cart]


]]> http://www.basicmicro.com/BasicATOM-Pro-40-Module_p_63.html The BasicATOM Pro 40 is based on a powerful 32 bit processor with more hardware and a 20% speed increased compared to the Basic ATOM Pro 24 or 28 pin modules. The BasicATOM Pro 40 includes 56K of Flash, 4K of RAM, 4Kbytes EEPROM and 2 Hardware UARTs....[Read More]
Our Price: $69.95 [Add to Cart]


]]>
The BasicATOM Pro 40 is ideal for robotics applications requiring multi-tasking. Several of its must have features include 2 hardware UARTS (Serial Ports), up to 6 hardware PWM, background controlled servo commands, true 32 bit floating point and integer math.

The BasicATOM Pro 40 is capable of running up to 16 servos and monitoring its 2 hardware UARTS and performing complex floating point math calculations without a hiccup!

]]> <![CDATA[Basic ATOM Pro One Module]]> http://www.basicmicro.com/Basic-ATOM-Pro-One-Module_p_64.html Fri, 17 May 2013 00:00:00 EST The BasicATOM Pro ONE module is a low cost self contained microcontroller. Same great features as its big brothers but with 8 I/O and one hardware serial port. The BasicATOM Pro is Basic Stamp 1 (BS1) pin compatible.The new BasicATOM Pro One is ideal...[Read More]
Our Price: $29.95 [Add to Cart]


]]> http://www.basicmicro.com/Basic-ATOM-Pro-One-Module_p_64.html The BasicATOM Pro ONE module is a low cost self contained microcontroller. Same great features as its big brothers but with 8 I/O and one hardware serial port. The BasicATOM Pro is Basic Stamp 1 (BS1) pin compatible.The new BasicATOM Pro One is ideal...[Read More]
Our Price: $29.95 [Add to Cart]


]]>
The new BasicATOM Pro One is ideal for the classroom or that small project where a low cost microcontroller solution is required. Educational use can benefit from its low cost and powerful command set. The BasicATOM Pro One can be programmed from a simple serial cable and 9v battery.

The BasicATOM Pro One is based on a powerful 32 bit processor. It has 32K of Flash memory for your programs, 2K of ram which is enough space for 2000 byte sized variables and is programmable in BASIC, C or ASM. Assembly can be mixed with your BASIC or C programs.

]]> <![CDATA[BasicATOM Pro 28 Development Kit]]> http://www.basicmicro.com/BasicATOM-Pro-28-Development-Kit_p_65.html Fri, 17 May 2013 00:00:00 EST BasicATOM Pro 28 Development Kit. Everything included to Get Started!IncludesBasicATOM Pro 28 Pin Module BasicATOM USB Universal Development Board BasicATOM Printed Manual Power Supply & USB Cable 25pcs Male to Male Jumper Wires...[Read More]
Our Price: $129.95 [Add to Cart]


]]> http://www.basicmicro.com/BasicATOM-Pro-28-Development-Kit_p_65.html BasicATOM Pro 28 Development Kit. Everything included to Get Started!IncludesBasicATOM Pro 28 Pin Module BasicATOM USB Universal Development Board BasicATOM Printed Manual Power Supply & USB Cable 25pcs Male to Male Jumper Wires...[Read More]
Our Price: $129.95 [Add to Cart]


]]>
Includes
  • BasicATOM Pro 28 Pin Module
  • BasicATOM USB Universal Development Board
  • BasicATOM Printed Manual
  • Power Supply & USB Cable
  • 25pcs Male to Male Jumper Wires


    • ]]>         <![CDATA[BasicATOM Lab Board]]> http://www.basicmicro.com/BasicATOM-Lab-Board_p_68.html Fri, 17 May 2013 00:00:00 EST The BasicATOM USB Lab Board works with all BasicATOM and BasicATOM Pro modules. The included dual USB and serial port allow you to program your BasicATOM and BasicATOM Pro from any computer. No more expensive adapters. Some of the lab board features ...[Read More]
    Our Price: $79.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/BasicATOM-Lab-Board_p_68.html The BasicATOM USB Lab Board works with all BasicATOM and BasicATOM Pro modules. The included dual USB and serial port allow you to program your BasicATOM and BasicATOM Pro from any computer. No more expensive adapters. Some of the lab board features ...[Read More]
    Our Price: $79.95 [Add to Cart]


    ]]>
    Fully compatible with the Basic Stamp.

    ]]>         <![CDATA[Universal Development Board]]> http://www.basicmicro.com/Universal-Development-Board_p_69.html Fri, 17 May 2013 00:00:00 EST The Universal Development Board works with all BasicAtom and BasicAtom Pro modules. The dual USB or serial port gives you the flexible to program your BasicATOM and BasicATOM Pro module from any computer. Some available features for your next creatio...[Read More]
    Our Price: $49.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Universal-Development-Board_p_69.html The Universal Development Board works with all BasicAtom and BasicAtom Pro modules. The dual USB or serial port gives you the flexible to program your BasicATOM and BasicATOM Pro module from any computer. Some available features for your next creatio...[Read More]
    Our Price: $49.95 [Add to Cart]


    ]]>
    When using the on board RS232 to program the BasicATOM modules, the USB serial bridge (FTDI) can be used in your own circuit.>br>
    ]]>         <![CDATA[BasicATOM Pro One Development Kit]]> http://www.basicmicro.com/BasicATOM-Pro-One-Development-Kit_p_112.html Fri, 17 May 2013 00:00:00 EST BasicATOM Pro One Development Kit. Everything included to Get Started! Includes Printed Manual, software on CD-ROM, USB Cable, Power Supply, BasicATOM Pro One module and BasicATOM USB Universal Development Board.IncludesBasicATOM Pro 14 Pin Module Ba...[Read More]
    Our Price: $99.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/BasicATOM-Pro-One-Development-Kit_p_112.html BasicATOM Pro One Development Kit. Everything included to Get Started! Includes Printed Manual, software on CD-ROM, USB Cable, Power Supply, BasicATOM Pro One module and BasicATOM USB Universal Development Board.IncludesBasicATOM Pro 14 Pin Module Ba...[Read More]
    Our Price: $99.95 [Add to Cart]


    ]]>
    Includes
  • BasicATOM Pro 14 Pin Module
  • BasicATOM Universal Development Board
  • BasicATOM Printed Manual
  • Power Supply & Serial Cable
  • 25pcs Male to Male Jumper Wires
    • ]]>         <![CDATA[BasicATOM Pro 40 Development Kit]]> http://www.basicmicro.com/BasicATOM-Pro-40-Development-Kit_p_113.html Fri, 17 May 2013 00:00:00 EST The BasicATOM Pro 40 Development Kit. Everything included to Get Started!IncludesBasicATOM Pro 40 Pin Module BasicATOM USB Universal Development Board BasicATOM Printed Manual Power Supply & USB Cable 25pcs Male to Male Jumper Wires...[Read More]
    Our Price: $139.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/BasicATOM-Pro-40-Development-Kit_p_113.html The BasicATOM Pro 40 Development Kit. Everything included to Get Started!IncludesBasicATOM Pro 40 Pin Module BasicATOM USB Universal Development Board BasicATOM Printed Manual Power Supply & USB Cable 25pcs Male to Male Jumper Wires...[Read More]
    Our Price: $139.95 [Add to Cart]


    ]]>
    Includes
  • BasicATOM Pro 40 Pin Module
  • BasicATOM USB Universal Development Board
  • BasicATOM Printed Manual
  • Power Supply & USB Cable
  • 25pcs Male to Male Jumper Wires
    • ]]>         <![CDATA[Cylon RED LED Display]]> http://www.basicmicro.com/Cylon-RED-LED-Display_p_138.html Fri, 17 May 2013 00:00:00 EST The Cylon LED Display is great way to dress up your robot or RC. Its a 12 LED sequencer with 10 built in patterns. Each Cylon LED Display is controllable from a standard RC receiver or microcontroller. Using a microcontroller you can control what pat...[Read More]
    Our Price: $16.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Cylon-RED-LED-Display_p_138.html The Cylon LED Display is great way to dress up your robot or RC. Its a 12 LED sequencer with 10 built in patterns. Each Cylon LED Display is controllable from a standard RC receiver or microcontroller. Using a microcontroller you can control what pat...[Read More]
    Our Price: $16.95 [Add to Cart]


    ]]>
    You can give your robot the cylon, knight rider or police car lights. Have the coolest robot or rc in town!

    ]]>         <![CDATA[ARC32]]> http://www.basicmicro.com/ARC32_p_141.html Fri, 17 May 2013 00:00:00 EST The ARC32 is a state of the art servo controller and robotics controller. It utilizes a hybrid hardware solution to drive 32 servos with less than 1% CPU time. In addition to being based on a blazing fast 32 bit microcontroller, its the only affordab...[Read More]
    Our Price: $89.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/ARC32_p_141.html The ARC32 is a state of the art servo controller and robotics controller. It utilizes a hybrid hardware solution to drive 32 servos with less than 1% CPU time. In addition to being based on a blazing fast 32 bit microcontroller, its the only affordab...[Read More]
    Our Price: $89.95 [Add to Cart]


    ]]>
    True 32 bit math hardware is critical for the most demanding robotics application. Creating position data for 32 servos on the fly is nearly impossible without high speed 32 bith math. Things like inverse kinematics are now possible using the ARC32. In the past only a PC based system could handle the task.

    The ARC32 is programmable in Basic, C or ASM using Basic Micro Studio IDE. The ARC32 offers many ready to go advance applications that demonstrate its raw power.

    See the video below of the ARC32 in action controlling 18 servos on a lynxmotion BH3R with wireless PS2 controller.

    ]]>         <![CDATA[Cylon Blue LED Display]]> http://www.basicmicro.com/Cylon-Blue-LED-Display_p_142.html Fri, 17 May 2013 00:00:00 EST The Cylon LED Display is great way to dress up your robot or RC. Its a 12 LED sequencer with 10 built in patterns. Each Cylon LED Display is controllable from a standard RC receiver or microcontroller. Using a microcontroller you can control what pat...[Read More]
    Our Price: $24.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Cylon-Blue-LED-Display_p_142.html The Cylon LED Display is great way to dress up your robot or RC. Its a 12 LED sequencer with 10 built in patterns. Each Cylon LED Display is controllable from a standard RC receiver or microcontroller. Using a microcontroller you can control what pat...[Read More]
    Our Price: $24.95 [Add to Cart]


    ]]>
    You can give your robot the cylon, knight rider or police car lights. Have the coolest robot or rc in town!

    ]]>         <![CDATA[Nano 28X]]> http://www.basicmicro.com/Nano-28X_p_143.html Fri, 17 May 2013 00:00:00 EST The Nano 28X is a turbo version of the Nano. The Nano X lets you get the most performance possible from a small BASIC programmable microcontroller. It runs at 20Mhz with an external resonator. The Nano is an excellent way to get started with microcon...[Read More]
    Our Price: $10.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Nano-28X_p_143.html The Nano 28X is a turbo version of the Nano. The Nano X lets you get the most performance possible from a small BASIC programmable microcontroller. It runs at 20Mhz with an external resonator. The Nano is an excellent way to get started with microcon...[Read More]
    Our Price: $10.95 [Add to Cart]


    ]]>
    The Nano is an excellent way to get started with microcontrollers. The BASIC programming environment is free and offers many sample programs along with a free manual.

    Your program is downloaded to the Nano using a simple serial or USB connection to your PC.

    ]]>         <![CDATA[Nano 40X]]> http://www.basicmicro.com/Nano-40X_p_145.html Fri, 17 May 2013 00:00:00 EST The Nano 40X is a turbo version of the Nano. The Nano X lets you get the most performance possible from a small BASIC programmable microcontroller. It runs at 20Mhz with an external resonator. The Nano is an excellent way to get started with microcon...[Read More]
    Our Price: $12.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Nano-40X_p_145.html The Nano 40X is a turbo version of the Nano. The Nano X lets you get the most performance possible from a small BASIC programmable microcontroller. It runs at 20Mhz with an external resonator. The Nano is an excellent way to get started with microcon...[Read More]
    Our Price: $12.95 [Add to Cart]


    ]]>
    The Nano is an excellent way to get started with microcontrollers. The BASIC programming environment is free and offers many sample programs along with a free manual.

    Your program is downloaded to the Nano using a simple serial or USB connection to your PC.

    ]]>         <![CDATA[Robo Tank Track Kit - Tamiya Gear Box]]> http://www.basicmicro.com/Robo-Tank-Track-Kit--Tamiya-Gear-Box_p_158.html Fri, 17 May 2013 00:00:00 EST The Robo Track Kit links are made from a high grade rubberized material with built in cleats to ensure your robot will maintain excellent tracking on any surface. Each kit includes 40 track links with pins, 2 idler cogs, 2 drive cogs and 2 shoulder b...[Read More]
    Our Price: $29.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Robo-Tank-Track-Kit--Tamiya-Gear-Box_p_158.html The Robo Track Kit links are made from a high grade rubberized material with built in cleats to ensure your robot will maintain excellent tracking on any surface. Each kit includes 40 track links with pins, 2 idler cogs, 2 drive cogs and 2 shoulder b...[Read More]
    Our Price: $29.95 [Add to Cart]


    ]]>
    ]]>         <![CDATA[Robo Tank Track Kit - GM Geared Motor]]> http://www.basicmicro.com/Robo-Tank-Track-Kit--GM-Geared-Motor_p_176.html Fri, 17 May 2013 00:00:00 EST The Robo Tank Track Kit links are made from a high grade rubberized material with built in cleats to ensure your robot will maintain excellent traction on any surface. Each kit includes 40 track links with pins, 2 idler cogs, 2 drive cogs, 2 mount sc...[Read More]
    Our Price: $29.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Robo-Tank-Track-Kit--GM-Geared-Motor_p_176.html The Robo Tank Track Kit links are made from a high grade rubberized material with built in cleats to ensure your robot will maintain excellent traction on any surface. Each kit includes 40 track links with pins, 2 idler cogs, 2 drive cogs, 2 mount sc...[Read More]
    Our Price: $29.95 [Add to Cart]


    ]]>
    ]]>         <![CDATA[Nano 40 Pin Microcontroller Board]]> http://www.basicmicro.com/Nano-40-Pin-Microcontroller-Board_p_186.html Fri, 17 May 2013 00:00:00 EST Nano project board can be mated with the Nano prototype shield which is a removable prototyping area. You can reuse your Nano 40 project board over and over again only replacing the low cost prototype area. This makes the Nano project boards a great ...[Read More]
    Our Price: $16.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Nano-40-Pin-Microcontroller-Board_p_186.html Nano project board can be mated with the Nano prototype shield which is a removable prototyping area. You can reuse your Nano 40 project board over and over again only replacing the low cost prototype area. This makes the Nano project boards a great ...[Read More]
    Our Price: $16.95 [Add to Cart]


    ]]>
    The Nano 40 Pin Microcontroller Board works with the Nano40 and Nano40x chips. Shipped with a resonator for the NanoX. It is assembled and tested.

    ]]>         <![CDATA[Nano 18/28 Pin Microcontroller Board]]> http://www.basicmicro.com/Nano-1828-Pin-Microcontroller-Board_p_187.html Fri, 17 May 2013 00:00:00 EST Nano project board can be mated with the Nano prototype shield which is a removable prototyping area. You can reuse your Nano 18/28 project board over and over again only replacing the low cost prototype area. This makes the Nano project boards a gre...[Read More]
    Our Price: $16.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Nano-1828-Pin-Microcontroller-Board_p_187.html Nano project board can be mated with the Nano prototype shield which is a removable prototyping area. You can reuse your Nano 18/28 project board over and over again only replacing the low cost prototype area. This makes the Nano project boards a gre...[Read More]
    Our Price: $16.95 [Add to Cart]


    ]]>
    The Nano 18/28 Pin Microcontroller Board works with the Nano18, Nano28 and Nano28x chips. Shipped with a resonator for the NanoX. It is assembled and tested.

    ]]>         <![CDATA[Nano Motor Driver]]> http://www.basicmicro.com/Nano-Motor-Driver_p_189.html Fri, 17 May 2013 00:00:00 EST Introducing the low cost Nano Motor Driver board. The board is great for driving motors like the Tamiya twin gear boxes. The Nano Motor Driver board also includes 7 headers for driving servos or reading analog peripherals such as potentiometers, acce...[Read More]
    Our Price: $16.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Nano-Motor-Driver_p_189.html Introducing the low cost Nano Motor Driver board. The board is great for driving motors like the Tamiya twin gear boxes. The Nano Motor Driver board also includes 7 headers for driving servos or reading analog peripherals such as potentiometers, acce...[Read More]
    Our Price: $16.95 [Add to Cart]


    ]]>
    With its ability to drive 2 dc motors bidirectionally or continuous rotation servos it can make a great platform for robotics. Drive any of the Tamiya geared motor kits!

    ]]>         <![CDATA[Nano 8]]> http://www.basicmicro.com/Nano-8_p_191.html Fri, 17 May 2013 00:00:00 EST The Nano is an easy to use microcontroller based on a powerful BASIC programming language. The programming language is free for download. It includes several sample programs and a free manual.The Nano runs up to 2x faster on average than competing pr...[Read More]
    Our Price: $2.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Nano-8_p_191.html The Nano is an easy to use microcontroller based on a powerful BASIC programming language. The programming language is free for download. It includes several sample programs and a free manual.The Nano runs up to 2x faster on average than competing pr...[Read More]
    Our Price: $2.95 [Add to Cart]


    ]]>
    The Nano runs up to 2x faster on average than competing products! No resonator for reduced part count.

    The Nano commands are NOT tied to specific pins. Downloading your program to the Nano is done using a simple serial or USB connection from your PC.

    ]]>         <![CDATA[Nano 8 Pin Microcontroller Board]]> http://www.basicmicro.com/Nano-8-Pin-Microcontroller-Board_p_212.html Fri, 17 May 2013 00:00:00 EST Nano 8 Microcontroller Board works with the new Nano 8 processor. This board combined with a Nano 8 makes one of the lowest cost microcontroller solutions available. All Nano 8 I/O are brought out to headers. The Nano 8 can be programmed in circuit u...[Read More]
    Our Price: $10.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Nano-8-Pin-Microcontroller-Board_p_212.html Nano 8 Microcontroller Board works with the new Nano 8 processor. This board combined with a Nano 8 makes one of the lowest cost microcontroller solutions available. All Nano 8 I/O are brought out to headers. The Nano 8 can be programmed in circuit u...[Read More]
    Our Price: $10.95 [Add to Cart]


    ]]>
    The Nano 8 Microcontroller Board includes a power led and power regulator. You can also power the board from your own regulated power supply.


    ]]>         <![CDATA[Nano 8 Pin Mini Project Board]]> http://www.basicmicro.com/Nano-8-Pin-Mini-Project-Board_p_213.html Fri, 17 May 2013 00:00:00 EST Nano 8 Mini Board works with the new Nano 8 processor. This board is one of the smallest microcontroller boards we have seen. All Nano 8 I/O are brought out to headers. The Nano 8 can be programmed in circuit using the USB2Serial adapter or your own ...[Read More]
    Our Price: $9.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Nano-8-Pin-Mini-Project-Board_p_213.html Nano 8 Mini Board works with the new Nano 8 processor. This board is one of the smallest microcontroller boards we have seen. All Nano 8 I/O are brought out to headers. The Nano 8 can be programmed in circuit using the USB2Serial adapter or your own ...[Read More]
    Our Price: $9.95 [Add to Cart]


    ]]>
    The Nano 8 Mini Board includes a power led and mode button. The board will work from 4V to 6V power sources. Typically this is 4AA batteries.


    ]]>         <![CDATA[12" Female to Female Servo Cable - Pair]]> http://www.basicmicro.com/12-Female-to-Female-Servo-Cable--Pair_p_217.html Fri, 17 May 2013 00:00:00 EST The female to female servo cable can be used as an extension cable or to interconnect devices to each other. Use to connect RoboClaw to an ARC32 or Arduino.Includes:2 12 F/F Servo cables...[Read More]
    Our Price: $3.89 [Add to Cart]


    ]]>     http://www.basicmicro.com/12-Female-to-Female-Servo-Cable--Pair_p_217.html The female to female servo cable can be used as an extension cable or to interconnect devices to each other. Use to connect RoboClaw to an ARC32 or Arduino.Includes:2 12 F/F Servo cables...[Read More]
    Our Price: $3.89 [Add to Cart]


    ]]>         <![CDATA[Nano 8 Starter Kit]]> http://www.basicmicro.com/Nano-8-Starter-Kit_p_218.html Fri, 17 May 2013 00:00:00 EST The Nano 8 Starter Kit includes everything you need to get started with the Nano 8. Kit Includes:2pc Nano 81pc USB2Serial Adapter1pc Nano 8 Pin Microcontroller Board1pc USB Cable....[Read More]
    Our Price: $29.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Nano-8-Starter-Kit_p_218.html The Nano 8 Starter Kit includes everything you need to get started with the Nano 8. Kit Includes:2pc Nano 81pc USB2Serial Adapter1pc Nano 8 Pin Microcontroller Board1pc USB Cable....[Read More]
    Our Price: $29.95 [Add to Cart]


    ]]>
    Kit Includes:
    2pc Nano 8
    1pc USB2Serial Adapter
    1pc Nano 8 Pin Microcontroller Board
    1pc USB Cable.

    ]]>         <![CDATA[Gear Head Motor Mounting Bracket Set]]> http://www.basicmicro.com/Gear-Head-Motor-Mounting-Bracket-Set_p_223.html Fri, 17 May 2013 00:00:00 EST Use this mounting bracket to easily attach a gear head motors to your robotics project.Kit Includes:8pc M3 x 6mm screws2pc Motor Bracket...[Read More]
    Our Price: $9.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Gear-Head-Motor-Mounting-Bracket-Set_p_223.html Use this mounting bracket to easily attach a gear head motors to your robotics project.Kit Includes:8pc M3 x 6mm screws2pc Motor Bracket...[Read More]
    Our Price: $9.95 [Add to Cart]


    ]]>
    Kit Includes:
    8pc M3 x 6mm screws
    2pc Motor Bracket
    ]]>         <![CDATA[Large Red RC Tire and Wheel Set - Pair]]> http://www.basicmicro.com/Large-Red-RC-Tire-and-Wheel-Set--Pair_p_227.html Fri, 17 May 2013 00:00:00 EST 1:10 scale Monster Truck Style Tires and Hubs...[Read More]
    Our Price: $14.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Large-Red-RC-Tire-and-Wheel-Set--Pair_p_227.html 1:10 scale Monster Truck Style Tires and Hubs...[Read More]
    Our Price: $14.95 [Add to Cart]


    ]]>         <![CDATA[Large Black RC Tire and Wheel Set - Pair]]> http://www.basicmicro.com/Large-Black-RC-Tire-and-Wheel-Set--Pair_p_228.html Fri, 17 May 2013 00:00:00 EST 1:10 scale Monster Truck Style Tires and Hubs...[Read More]
    Our Price: $14.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Large-Black-RC-Tire-and-Wheel-Set--Pair_p_228.html 1:10 scale Monster Truck Style Tires and Hubs...[Read More]
    Our Price: $14.95 [Add to Cart]


    ]]>         <![CDATA[Tamiya 70097 Twin Motor Gearbox]]> http://www.basicmicro.com/Tamiya-70097-Twin-Motor-Gearbox_p_230.html Fri, 17 May 2013 00:00:00 EST The Tamiya 70097 crystal clear dual motor gear box is great for use in small toy robots. Combine them with our Tamiya compatible track sets to complete your robot project....[Read More]
    Our Price: $8.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Tamiya-70097-Twin-Motor-Gearbox_p_230.html The Tamiya 70097 crystal clear dual motor gear box is great for use in small toy robots. Combine them with our Tamiya compatible track sets to complete your robot project....[Read More]
    Our Price: $8.95 [Add to Cart]


    ]]>         <![CDATA[USB RoboClaw 2x15A]]> http://www.basicmicro.com/USB-RoboClaw-2x15A_p_281.html Fri, 17 May 2013 00:00:00 EST New V3 upgraded features! Now 15Amp per channel, 30Amp peak, 3Amp switching mode BEC and now up to 8,000,000 pulse per second encoder support. Compatible with Arduino.The RoboClaw 2x15 Amp is an extremely efficient, versatile, dual channel synchronou...[Read More]
    Our Price: $109.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/USB-RoboClaw-2x15A_p_281.html New V3 upgraded features! Now 15Amp per channel, 30Amp peak, 3Amp switching mode BEC and now up to 8,000,000 pulse per second encoder support. Compatible with Arduino.The RoboClaw 2x15 Amp is an extremely efficient, versatile, dual channel synchronou...[Read More]
    Our Price: $109.95 [Add to Cart]


    ]]>
    The RoboClaw 2x15 Amp is an extremely efficient, versatile, dual channel synchronous regenerative motor controller. It supports dual quadrature encoders and can supply two brushed DC motors with 15 Amps continuous and 30 Amp peak.

    With dual quadrature decoding you get greater control over speed and velocity. Automatically maintain a speed even if the load increases. RoboClaw also has a built in PID routine for use with an external control system.

    RoboClaw is easy to control with several built in modes. It can be controlled from a standard RC receiver/transmitter, serial device, microcontroller or an analog source, such as a potentiometer based joystick. RoboClaw is equipped with screw terminal for fast connect and disconnect. All modes are set by the onboard dip switches making setup a snap!

    Being a synchronous regenerative motor controller means when ever RoboClaw is slowing down or breaking the batteries are being charged. With the advance circuitry it can also change direction during full throttle without damage!

    RoboClaw also includes a jumper selectable 5V 3A BEC and lithium cutoff mode which protects your batteries from damage. Get the power to win your next robotics competition!

    ]]>         <![CDATA[RoboClaw 2x60A]]> http://www.basicmicro.com/RoboClaw-2x60A_p_246.html Fri, 17 May 2013 00:00:00 EST New! Now 60Amp per channel, 120Amp peak, 3Amp switching mode BEC and now up to 8,000,000 pulse per second encoder support. Compatible with Arduino.The RoboClaw 2x60 Amp is an extremely efficient, versatile, dual channel synchronous regenerative motor...[Read More]
    Our Price: $189.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/RoboClaw-2x60A_p_246.html New! Now 60Amp per channel, 120Amp peak, 3Amp switching mode BEC and now up to 8,000,000 pulse per second encoder support. Compatible with Arduino.The RoboClaw 2x60 Amp is an extremely efficient, versatile, dual channel synchronous regenerative motor...[Read More]
    Our Price: $189.95 [Add to Cart]


    ]]>
    The RoboClaw 2x60 Amp is an extremely efficient, versatile, dual channel synchronous regenerative motor controller. It supports dual quadrature encoders and can supply two brushed DC motors with 60 Amps continuous and 120 Amp peak.

    With dual quadrature decoding you get greater control over speed and velocity. Automatically maintain a speed even if the load increases. RoboClaw also has a built in PID routine for use with an external control system.

    RoboClaw is easy to control with several built in modes. It can be controlled from a standard RC receiver/transmitter, serial device, microcontroller or an analog source, such as a potentiometer based joystick. RoboClaw is equipped with screw terminal for fast connect and disconnect. All modes are set by the onboard dip switches making setup a snap!

    Being a synchronous regenerative motor controller means when ever RoboClaw is slowing down or breaking the batteries are being charged. With the advance circuitry it can also change direction during full throttle without damage!

    RoboClaw also includes a jumper selectable 5V 3A BEC and lithium cutoff mode which protects your batteries from damage. Get the power to win your next robotics competition!

    ]]>         <![CDATA[The DaVinci - Arduino Compatible]]> http://www.basicmicro.com/The-DaVinci--Arduino-Compatible_p_260.html Fri, 17 May 2013 00:00:00 EST The DaVinci is an Arduino compatible board with several unique features to facilitate its use in robotics. The DaVinci includes a 2 pin screw terminal for use with batteries as the primary power source. It also includes a jumper to set RTS or DTR as ...[Read More]
    Our Price: $29.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/The-DaVinci--Arduino-Compatible_p_260.html The DaVinci is an Arduino compatible board with several unique features to facilitate its use in robotics. The DaVinci includes a 2 pin screw terminal for use with batteries as the primary power source. It also includes a jumper to set RTS or DTR as ...[Read More]
    Our Price: $29.95 [Add to Cart]


    ]]>         <![CDATA[Orion Servo Shield]]> http://www.basicmicro.com/Orion-Servo-Shield_p_261.html Fri, 17 May 2013 00:00:00 EST The Orion Servo Shield Provides up to 32 servo control outputs. 24 Pins are directly controlled by the on board processor and 8 pins passed through from the Arduino. 32 servos can be controlled at one time. The Orion also includes a speaker, 2 LEDs, ...[Read More]
    Our Price: $49.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Orion-Servo-Shield_p_261.html The Orion Servo Shield Provides up to 32 servo control outputs. 24 Pins are directly controlled by the on board processor and 8 pins passed through from the Arduino. 32 servos can be controlled at one time. The Orion also includes a speaker, 2 LEDs, ...[Read More]
    Our Price: $49.95 [Add to Cart]


    ]]>
    A complete servo and robotics control library is included for the Orion shield. This library supports up to 4 degrees of freedom with Inverse Kinematics as well as standard servo position and speed settings. The Orion Shield also supports position and power feedback (PPF) using the new Orion Robotics servo HVD-220.

    The Orion Servo Shield utilizes a secondary processor offloading the most demanding task. The code is open source and available upon request. ]]>         <![CDATA[Rover Shield]]> http://www.basicmicro.com/Rover-Shield_p_262.html Fri, 17 May 2013 00:00:00 EST The Rover Shield can drive 2 dc brushed motors with up to 3amps per motor. It also includes a built in 3amp switching regulator, 2 user buttons, 1 speaker,2 LEDs, battery voltage detection and the L298 motor controller with separate main and logic po...[Read More]
    Our Price: $39.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Rover-Shield_p_262.html The Rover Shield can drive 2 dc brushed motors with up to 3amps per motor. It also includes a built in 3amp switching regulator, 2 user buttons, 1 speaker,2 LEDs, battery voltage detection and the L298 motor controller with separate main and logic po...[Read More]
    Our Price: $39.95 [Add to Cart]


    ]]>         <![CDATA[Nomad Shield]]> http://www.basicmicro.com/Nomad-Shield_p_263.html Fri, 17 May 2013 00:00:00 EST The Nomad is designed to make it easy to integrate an Arduino into any robotics project. In addition it can run up to 8 servos with the Arduino servo library. Headers are arranged in groups of 4 with separate power jumpers selecting battery voltage o...[Read More]
    Our Price: $19.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/Nomad-Shield_p_263.html The Nomad is designed to make it easy to integrate an Arduino into any robotics project. In addition it can run up to 8 servos with the Arduino servo library. Headers are arranged in groups of 4 with separate power jumpers selecting battery voltage o...[Read More]
    Our Price: $19.95 [Add to Cart]


    ]]>
    The Nomad Shield includes 3 user buttons, 3 LEDs , 1 speaker, separate servo and logic power inputs and a Battery voltage detection circuit all in one low cost shield for Arduino. ]]>         <![CDATA[15" Female Servo to Bare wire cable - Pair]]> http://www.basicmicro.com/15-Female-Servo-to-Bare-wire-cable--Pair_p_256.html Fri, 17 May 2013 00:00:00 EST Female Servo connector to bare wire ends. Wire up your own sensors for easy use on an ARC32 or use as replacement servo cables if you've damaged the cables on your own servos....[Read More]
    Our Price: $3.99 [Add to Cart]


    ]]>     http://www.basicmicro.com/15-Female-Servo-to-Bare-wire-cable--Pair_p_256.html Female Servo connector to bare wire ends. Wire up your own sensors for easy use on an ARC32 or use as replacement servo cables if you've damaged the cables on your own servos....[Read More]
    Our Price: $3.99 [Add to Cart]


    ]]>         <![CDATA[12" Male to Female Servo Cable Extension - Pair]]> http://www.basicmicro.com/12-Male-to-Female-Servo-Cable-Extension--Pair_p_257.html Fri, 17 May 2013 00:00:00 EST The 12 servo extension cable simplifies extending the lengths of F/F servo cables without needing to use a Male/Male 3 pin header.Includes:2 12 M/F Servo cable extentions...[Read More]
    Our Price: $3.89 [Add to Cart]


    ]]>     http://www.basicmicro.com/12-Male-to-Female-Servo-Cable-Extension--Pair_p_257.html The 12 servo extension cable simplifies extending the lengths of F/F servo cables without needing to use a Male/Male 3 pin header.Includes:2 12 M/F Servo cable extentions...[Read More]
    Our Price: $3.89 [Add to Cart]


    ]]>         <![CDATA[24" DC Motor power cables - Pair]]> http://www.basicmicro.com/24-DC-Motor-power-cables--Pair_p_258.html Fri, 17 May 2013 00:00:00 EST These DC Motor cables will plug onto the ends of our 20:1 Gear Ratio DC Motor as well as many industry standard DC motors....[Read More]
    Our Price: $3.99 [Add to Cart]


    ]]>     http://www.basicmicro.com/24-DC-Motor-power-cables--Pair_p_258.html These DC Motor cables will plug onto the ends of our 20:1 Gear Ratio DC Motor as well as many industry standard DC motors....[Read More]
    Our Price: $3.99 [Add to Cart]


    ]]>         <![CDATA[15" Tamiya Battery Connector/Power Switch harness]]> http://www.basicmicro.com/15-Tamiya-Battery-ConnectorPower-Switch-harness_p_259.html Fri, 17 May 2013 00:00:00 EST This battery harness is a convenient way to add a power switch to your electronics project....[Read More]
    Our Price: $4.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/15-Tamiya-Battery-ConnectorPower-Switch-harness_p_259.html This battery harness is a convenient way to add a power switch to your electronics project....[Read More]
    Our Price: $4.95 [Add to Cart]


    ]]>         <![CDATA[DC Motor and Tire Kit - Red]]> http://www.basicmicro.com/DC-Motor-and-Tire-Kit--Red_p_268.html Fri, 17 May 2013 00:00:00 EST Get your robot up and running fast with this convenient kit.Kit includes:2 30:1 DC GearHead Motors2 5 1:10 scale Monster Truck Style Tires and Red Hubs2 Hub Adapters2 DC Power Cables...[Read More]
    Our Price: $64.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/DC-Motor-and-Tire-Kit--Red_p_268.html Get your robot up and running fast with this convenient kit.Kit includes:2 30:1 DC GearHead Motors2 5 1:10 scale Monster Truck Style Tires and Red Hubs2 Hub Adapters2 DC Power Cables...[Read More]
    Our Price: $64.95 [Add to Cart]


    ]]>
    Kit includes:
    2 30:1 DC GearHead Motors
    2 5" 1:10 scale Monster Truck Style Tires and Red Hubs
    2 Hub Adapters
    2 DC Power Cables
    ]]>         <![CDATA[DC Motor and Tire Kit - Black]]> http://www.basicmicro.com/DC-Motor-and-Tire-Kit--Black_p_269.html Fri, 17 May 2013 00:00:00 EST Get your robot up and running fast with this convenient kit.Kit includes:2 30:1 DC GearHead Motors2 5 1:10 scale Monster Truck Style Tires and Black Hubs2 Hub Adapters2 DC Power Cables...[Read More]
    Our Price: $64.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/DC-Motor-and-Tire-Kit--Black_p_269.html Get your robot up and running fast with this convenient kit.Kit includes:2 30:1 DC GearHead Motors2 5 1:10 scale Monster Truck Style Tires and Black Hubs2 Hub Adapters2 DC Power Cables...[Read More]
    Our Price: $64.95 [Add to Cart]


    ]]>
    Kit includes:
    2 30:1 DC GearHead Motors
    2 5" 1:10 scale Monster Truck Style Tires and Black Hubs
    2 Hub Adapters
    2 DC Power Cables
    ]]>         <![CDATA[USB RoboClaw 2x30A]]> http://www.basicmicro.com/USB-RoboClaw-2x30A_p_282.html Fri, 17 May 2013 00:00:00 EST New V3 upgraded features! Now 30Amp per channel, 60Amp peak, 3Amp switching mode BEC and now up to 8,000,000 pulse per second encoder support. Compatible with Arduino.The RoboClaw 2x30 Amp is an extremely efficient, versatile, dual channel synchronou...[Read More]
    Our Price: $144.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/USB-RoboClaw-2x30A_p_282.html New V3 upgraded features! Now 30Amp per channel, 60Amp peak, 3Amp switching mode BEC and now up to 8,000,000 pulse per second encoder support. Compatible with Arduino.The RoboClaw 2x30 Amp is an extremely efficient, versatile, dual channel synchronou...[Read More]
    Our Price: $144.95 [Add to Cart]


    ]]>
    The RoboClaw 2x30 Amp is an extremely efficient, versatile, dual channel synchronous regenerative motor controller. It supports dual quadrature encoders and can supply two brushed DC motors with 30 Amps continuous and 60 Amp peak.

    With dual quadrature decoding you get greater control over speed and velocity. Automatically maintain a speed even if the load increases. RoboClaw also has a built in PID routine for use with an external control system.

    RoboClaw is easy to control with several built in modes. It can be controlled from a standard RC receiver/transmitter, serial device, microcontroller or an analog source, such as a potentiometer based joystick. RoboClaw is equipped with screw terminal for fast connect and disconnect. All modes are set by the onboard dip switches making setup a snap!

    Being a synchronous regenerative motor controller means when ever RoboClaw is slowing down or breaking the batteries are being charged. With the advance circuitry it can also change direction during full throttle without damage!

    RoboClaw also includes a jumper selectable 5V 3A BEC and lithium cutoff mode which protects your batteries from damage. Get the power to win your next robotics competition!

    ]]>         <![CDATA[30:1 300rpm 12v DC Gearhead Motor]]> http://www.basicmicro.com/301-300rpm-12v-DC-Gearhead-Motor_p_270.html Fri, 17 May 2013 00:00:00 EST Add power to your motor project. These motors include the extended rear axel to easily add encoder support to your robot project....[Read More]
    Our Price: $21.95 [Add to Cart]


    ]]>     http://www.basicmicro.com/301-300rpm-12v-DC-Gearhead-Motor_p_270.html Add power to your motor project. These motors include the extended rear axel to easily add encoder support to your robot project....[Read More]
    Our Price: $21.95 [Add to Cart]


    ]]>